Investigation of the effect of boron carbide-doped diamond sockets on cutting performance in granite cutting
Yazarlar (2)
Doç. Dr. Gökhan EKİNCİOĞLU Kırşehir Ahi Evran Üniversitesi, Türkiye
Raşit Altındağ Süleyman Demirel Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Arabian Journal of Geosciences (Q4) | ||
| Dergi ISSN | 1866-7511 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 03-2019 |
| Cilt / Sayı / Sayfa | 12 / 5 / – | DOI | 10.1007/s12517-019-4329-9 |
| Makale Linki | https://link.springer.com/content/pdf/10.1007/s12517-019-4329-9.pdf | ||
| Özet |
| In the study, boron carbide was added to the matrix in different ratios in order to increase the wear resistance of the socket matrix and to strengthen the bond at the matrix interface with the diamond. Under the same sintering conditions, eight different tool sockets were produced. One of them is boron carbide non-doped (0% B4C) reference socket. The others are boron carbide-doped sockets in different ratios (1-2-3-4-5-6-7% B4C). The produced sockets were welded around a 350-mm saw to produce circular saws. In the study, firstly, the metallographic properties of the boron carbide non-doped (0% B4C) and boron carbide-doped (1-2-3-4-5-6-7% B4C) sockets such as theoretical densities, unit volume weights, porosity, Knoop hardness (HK), and weight wear loss were determined. Cutting experiments were then carried out (under constant cutting conditions) with eight different circular saws on a single hard stone … |
| Anahtar Kelimeler |
| Boron carbide | Diamond sockets | Granite | Noise | Specific abrasion | Specific cutting energy |