Estimating the brittleness values of carbonated rocks with Shore, Schmidt, and Leeb hardness values
Yazarlar (2)
Doç. Dr. Gökhan EKİNCİOĞLU Kırşehir Ahi Evran Üniversitesi, Türkiye
Deniz Akbay Çanakkale Onsekiz Mart Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Environmental Earth Sciences (Q2) | ||
| Dergi ISSN | 1866-6280 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 01-2022 |
| Cilt / Sayı / Sayfa | 81 / 7 / – | DOI | 10.1007/s12665-022-10332-w |
| Makale Linki | http://dx.doi.org/10.1007/s12665-022-10332-w | ||
| Özet |
| There is not a defined standard method for determining the brittleness of rocks. Prediction of rock brittleness using rebound based hardness test methods is widely used in the characterization of rocks because they are non-destructive, inexpensive, and easy to apply. Rock surface hardness can also be used to predict the physical and mechanical properties of rocks. In this study, hardness values of 12 different carbonated rocks were determined on the same specimens using 3 different methods. C-2 type Shore Scleroscope, L-type Schmidt hammer, and Leeb hardness test device are rebound based hardness tests. The aim of the study is to determine the most suitable rebound hardness test method, that can be used to estimate the four different brittleness values recommended, by considering the compressive and tensile strength values in the literature. Relationships between the hardness values obtained using … |
| Anahtar Kelimeler |
| Compressive strength | Leeb hardness | Rock brittleness | Schmidt hardness | Shore hardness | Tensile strength |
| Atıf Sayıları | |
| Google Scholar | 16 |
| Scopus | 10 |