| Yazarlar (7) |
Ugur Koklu
|
|
Asli Gunay Bulutsuz
|
|
Oguz Kocar
|
|
Onder Ayer
|
|
Muhammmed Enes Ilgazi
|
Dr. Öğr. Üyesi Sercan BASİT
Kırşehir Ahi Evran Üniversitesi, Türkiye |
|
Hakan Yilmazer
|
| Özet |
| Biodegradable implant materials hold significant potential by degrading within the body after fulfilling their intended function. The advantages of such materials emphasize the need for increased diversity in functional biomaterials and further research in this area. This experimental study aims to develop and investigate Zn-2Mg-0.1Cu alloys and evaluate their machinability. To develop Zn-2Mg-0.1Cu alloys, high-purity elements were melted at 565°C under an argon atmosphere and cast into preheated steel molds. Homogenization at 350°C for 16 hours followed by quenching with iced water was applied to ensure uniform microstructure. The samples were examined using microstructural analysis, and mechanical tests were conducted to assess the effects of Cu addition. In the drilling process, the feed rate was initially kept constant at 200 mm/min, while the spindle speed was varied (2000, 4000, and 6000 rpm) to … |
| Anahtar Kelimeler |
| Cu addition | biodegradable Zn-2Mg-0.1Cu | drilling |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING |
| Dergi ISSN | 0954-4089 Wos Dergi Scopus Dergi |
| Dergi Grubu | Q2 |
| Makale Dili | İngilizce |
| Basım Tarihi | 08-2025 |
| Doi Numarası | 10.1177/09544089251366050 |
| Atıf Sayıları |
