Investigation of the initiator effect on mechanical, thermal and chemical properties of polyesters used in composite material production
Yazarlar (6)
Dr. Öğr. Üyesi Şevki EREN Kırşehir Ahi Evran Üniversitesi, Türkiye
Bayram Poyraz Düzce Üniversitesi, Türkiye
Neslihan Gökçe Düzce Üniversitesi, Türkiye
Ayhan Şamandar Düzce Üniversitesi, Türkiye
Batuhan Aykanat Düzce Üniversitesi, Türkiye
Serkan Subaşı Düzce Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SCOPUS dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Journal of the Faculty of Engineering and Architecture of Gazi University | ||
| Dergi ISSN | 1300-1884 Wos Dergi Scopus Dergi | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2018 |
| Kabul Tarihi | 12-04-2026 | Yayınlanma Tarihi | – |
| Cilt / Sayı / Sayfa | 33 / 4 / 1383–1396 | DOI | 10.17341/GAZIMMFD.416435 |
| Makale Linki | https://publons.com/wos-op/publon/47154581/ | ||
| Özet |
| Purpose: In this study, initiator effect and resin type on the mechanical, thermal, physical and chemical properties of the composites which obtained from orthophthalic and isophthalic based resin was investigated in detail.Theory and Methods: Both resins were molded in the glass plates followed mixture in the beher (PP), an ultrasonic homogenizer and ultratorax with MEKP and Cobalt Octoate having different ratio. Tensile strength, young modulus, bending strength and modulus of the produced composites were determined according to TS EN ISO 527-1, BS EN ISO 178 and BS EN ISO 178, respectively. Results: Initiator ratio and resin type influenced the mechanical, thermal and physical properties of the composites. Isophthalic based composites revealed higher mechanical properties than those of the composites which produced from ortho phthalic based resin. Styrene content and viscosity were higher in the isophthalic based resin. However, the ortho phthalic composites revealed higher thermal stability value than those of the isophthalic based composites.Conclusion: |
| Anahtar Kelimeler |
| Catalyst | Composite | Initiator | Mechanical property | Polyester |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Google Scholar | 12 |
| Scopus | 2 |