| Yazarlar |
Fahrettin Öztürk
Ankara Yıldırım Beyazıt Üniversitesi, Türkiye |
|
Serkan Toros
Niğde Ömer Halisdemir Üniversitesi, Türkiye |
Süleyman KILIÇ
Türkiye |
|
Muhammed Hakan Baş
|
| Özet |
| The use of advanced high strength steels in automotive industry has been increased recently. Dual-phase (DP) high-strength steel, which is an advanced high strength steel, has gained great attention due to its high strength and good formability. In this study, uniaxial tensile deformation of DP600 and DP800 advanced high strength steels were studied at temperatures between room temperature (RT) and 300 °C and at strain rates between 0.008 s-1and 0.16 s-1. Results indicate that the formability of the materials is lower after the testing at 200 °C and 300 °C than the testing at RT. Moreover, the formability decreases with the increasing strain rate. Finally, the forming should be done at RT and low strain rates to get good formability. © 2008 Verlag Stahleisen GmbH, Düsseldorf. |
| Anahtar Kelimeler |
| Advanced high strength steels | Formability | Warm forming |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | steel research international |
| Dergi ISSN | 1869-344X |
| Dergi Tarandığı Indeksler | SCI |
| Dergi Grubu | Q4 |
| Makale Dili | İngilizce |
| Basım Tarihi | 09-2008 |
| Cilt No | 79 |
| Sayı | 2 |
| Sayfalar | 295 / 300 |
