| Yazarlar |
Fahrettin Öztürk
Niğde Üniversitesi, Türkiye |
|
Serkan Toros
Niğde Ömer Halisdemir Üniversitesi, Türkiye |
Doç. Dr. Süleyman KILIÇ
Kırşehir Ahi Evran Üniversitesi, Türkiye |
|
Muhammed Hakan Baş
|
| Özet |
| Springback is one of the most common problems in sheet metal forming processes. It causes improper fit, which creates serious problems during assembly of the parts. Based on material strength, a considerable amount of elastic recovery during unloading can be observed. in this study, springback behaviour of a hardened 5083-H111 aluminium-magnesium (Al-Mg) alloy with a thickness of 3 mm using a 600 angle V-shape die bending process at various temperatures ranging from -50 to 300 degrees C was investigated. The effects of temperature on springback behaviour were identified. Results indicate that springback increased with decreasing temperature. The same amount of springback was measured at 0, 25, and 100 degrees C. It was observed that the amount of springback increased between 100 and 200 degrees C and then started to decrease beyond 200 degrees C. The lowest springback was obtained at 300 degrees C. |
| Anahtar Kelimeler |
| springback | 5083-H111 aluminium-magnesium alloy | V-bending | warm forming |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE |
| Dergi ISSN | 0954-4054 |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q2 |
| Makale Dili | İngilizce |
| Basım Tarihi | 01-2009 |
| Cilt No | 223 |
| Sayı | 4 |
| Sayfalar | 5 / 431 |
| Doi Numarası | 10.1243/09544054JEM1335 |
| Makale Linki | http://dx.doi.org/10.1243/09544054jem1335 |
| Atıf Sayıları | |
| WoS | 7 |
| SCOPUS | 9 |
| Google Scholar | 17 |
