AN INVESTIGATION ON THE COPMARISON OF THE COMPRESSIVE SRENGTH OF CORNER JOINTS OF WINDOW WHICH WERE PREPARED USING FIRST CLASS YELLOW PINE WOOD GREW AT THE CENTRAL ANATOLIA

Can, Omer; ÖNAL, MEHMET MUSTAFA

AN INVESTIGATION ON THE COPMARISON OF THE COMPRESSIVE SRENGTH OF CORNER JOINTS OF WINDOW WHICH WERE PREPARED USING FIRST CLASS YELLOW PINE WOOD GREW AT THE CENTRAL ANATOLIA

Yazarlar (2)

Omer Can

Prof. Dr. Mehmet Mustafa ÖNAL Kırşehir Ahi Evran Üniversitesi

Makale Türü	Özgün Makale (ESCI dergilerinde yayınlanan tam makale)
Dergi Adı	SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI
Dergi ISSN	1304-7205 Wos Dergi Scopus Dergi
Makale Dili	İngilizce	Basım Tarihi	01-2007
Cilt / Sayı / Sayfa	25 / 3 / 283–296	DOI	–

Özet

In this study 10 number of tree different, type of corner joints were prepared by first class yellow fir wood. First type of corner joint is grooved, the other type is 3 toothed, and the last type is 4 toothed. For gluing of samples Polivinilasetat glue was used. Compressive strength tests were performed on these samples.
As a result, samples having the highest compressive strength are groove type joint, then 3 toothed joint finally 3 toothed joint. Compressive strength's values for grooved, 3 toothed and 4 toothed joints are measured as 1,74 kg/cm(2), 0,89 kg/cm(2), and 0,80 kg/cm(2), respectively.

Anahtar Kelimeler

End joining | timber used in construction | yellow pine | wood

BM Sürdürülebilir Kalkınma Amaçları

Atıf Sayıları

Dergi Adı	Sigma Journal of Engineering and Natural Sciences-Sigma Muhendislik ve Fen Bilimleri Dergisi
Yayıncı	Yildiz Technical University
Açık Erişim	Evet
ISSN	1304-7205
E-ISSN	1304-7191
CiteScore	0,8
SJR	0,167
SNIP	0,253

AN INVESTIGATION ON THE COPMARISON OF THE COMPRESSIVE SRENGTH OF CORNER JOINTS OF WINDOW WHICH WERE PREPARED USING FIRST CLASS YELLOW PINE WOOD GREW AT THE CENTRAL ANATOLIA

Paylaş