| Yazarlar |
Ümit Nazlı TÜRKTEN
Kırşehir Ahi Evran Üniversitesi, Türkiye |
Ceyda Senem Uyguner Demirel
Boğaziçi Üniversitesi, Türkiye |
Yunus KARATAŞ
Kırşehir Ahi Evran Üniversitesi, Türkiye |
|
Fatma Miray Bekbölet
|
| Özet |
| Polyaniline (PANI) is a promising conducting polymer for surface modification of TiO2 to overcome limitations of the use of visible light and attain increased photocatalytic efficiency for the removal of organic contaminants. In this study, a series of polyaniline modified TiO2 (PANI-TiO2) composites were prepared by using "in-situ" chemical oxidation polymerization method. The composites were systematically characterized by Fourier transform infrared spectroscopy (equipped with an attenuated total reflection accessory, FTIR-ATR), Raman spectroscopy, X-ray diffractometry (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDAX), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), photoluminescence spectroscopy (PL), nitrogen (N-2) physisorption (Brunauer - Emmett - Teller surface area (S-BET) and Barrett-Joyner-Halenda (BJH) pore size analysis), thermogravimetry-derivative thermogravimetry (TG-DTG) techniques. XRD patterns of PANI-TiO2 composites confirmed both the amorphous phase of PANI and the crystalline character of TiO2. TG/DTG analysis complemented the XRD profiles that the interactions between PANI and TiO2 resulted in a more stable PANI-TiO2 matrix. SEM images displayed the dominant morphology as dandelion-like shapes of PANI being more pronounced with increasing PANI ratios in PANI-TiO2 composites. UV-DRS profiles revealed that the band gap energies of the composites were lower than bare TiO2 expressing a shift to the visible light region. Both PL and UV-DRS analyses confirmed the band-gap reduction phenomenon of PANI modification of TiO2. The incorporation of PANI into TiO2 resulted in a reduction of the surface area of TiO2. The composites were subsequently subjected to photocatalytic activity assessment tests using humic acid (HA) as a model of refractory organic matter (RfOM) under simulated solar irradiation (Uyguner-Demirel et al. Environ Sci Pollut Res 30 85626-85638, 2023). The morphological and structural changes attained upon application of photocatalysis were also evaluated by FTIR-ATR, Raman spectroscopy, XRD, and SEM-EDAX methods in a comparable manner. The FTIR-ATR spectral features of PANI, RfOM and all composites displayed peaks with slight shifts under pre- and post- photocatalytic conditions as well as following dark surface interactions. Besides exhibiting noticeable photocatalytic performance, PANI-TiO2 composites were also proven to maintain stability under non-selective oxidation conditions in the presence of a complex organic matrix. The prepared PANI-TiO2 composites overcoming the limitations of UVA light active bare TiO2 photocatalysis could possibly find a beneficial use as potential catalysts in solar photocatalytic applications. |
| Anahtar Kelimeler |
| PANI-TiO composites 2 | Photocatalysis | Refractory organic matter | Surface modification |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH |
| Dergi ISSN | 0944-1344 |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Makale Dili | Türkçe |
| Basım Tarihi | 11-2023 |
| Cilt No | 30 |
| Sayı | 51 |
| Sayfalar | 111182 / 111207 |
| Doi Numarası | 10.1007/s11356-023-30090-x |
| Makale Linki | http://dx.doi.org/10.1007/s11356-023-30090-x |
