Investigation of wear behavior of carbide based coated rolling roll materials under dry and lubricated conditions
Yazarlar (4)
Dr. Öğr. Üyesi Şeyma KORKMAZ Kırşehir Ahi Evran Üniversitesi, Türkiye
Mert Pehlivanoglu
Karabük Üniversitesi, Türkiye
Karabük Üniversitesi, Türkiye
Abdulkadir Orak Karabük Üniversitesi, Türkiye
M. Huseyin Cetin
Karabük Üniversitesi, Türkiye
Karabük Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Surface Topography Metrology and Properties | ||
| Dergi ISSN | 2051-672X Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | Türkçe | Basım Tarihi | 02-2021 |
| Cilt / Sayı / Sayfa | 9 / 1 / 15023–0 | DOI | 10.1088/2051-672X/abe595 |
| Makale Linki | https://iopscience.iop.org/article/10.1088/2051-672X/abe595/meta | ||
| Özet |
| In this study, the effect of TiCN and WC-Co coatings on the tribological performance of spheroidal graphite cast iron materials was investigated by wear tests under dry and lubricated conditions. The mechanical and physical effects of the coating processes were analysed by microhardness measurements and visual methods (SEM, EDX, XRD). The tribological effect of WC-Co and TiCN coated specimens were investigated by ball-on-plate wear tests carried out under dry and boron oil emulsion (5% concentration) conditions at 50 N load and 60 rpm sliding speed parameters. The friction coefficient and wear volume results were obtained to investigate the effect of the coating process and boron oil emulsion on friction and wear behaviour. The wear mechanisms were determined with SEM images obtained from the worn surfaces and surfaces analysed elementally with EDX images. Additionally, surface morphology … |
| Anahtar Kelimeler |
| rolling rolls | coating | boron-oil | tribology | 3D topography |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| WoS | 5 |
| SCOPUS | 6 |
| Google Scholar | 10 |