| Yazarlar |
Kadir Gök
Manisa Celâl Bayar Üniversitesi, Türkiye |
|
Sermet İnal
Kütahya Sağlık Bilimleri Üniversitesi, Türkiye |
Levent URTEKİN
Kırşehir Ahi Evran Üniversitesi, Türkiye |
|
Arif Gök
Amasya Üniversitesi, Türkiye |
| Özet |
| The biomechanical performance of stainless steel, titanium alloy, cobalt–chromium and NiTi alloy has been compared to fix with parallel fixation in Salter–Harris Type 4 fractures. The best material has been determined under the axial load. 3D model of the parallel fixation has been performed via SolidWorks. Ansys Workbench software was used for numerical analyses. All boundary conditions have defined in finite element analysis (FEA) software. The boundary conditions such as the loading, contact, friction and material model have been determined for FEA. The stress values occurring in the epiphyseal plate of the femur, upper screw and lower screw have been calculated based on von-Mises criteria. At the end of numerical analyses, we have the opinion that, in practice, use of Ti screws in Salter–Harris Type 4 distal femoral fractures will be advantageous. |
| Anahtar Kelimeler |
| 3D femoral model | Biomechanics | Different screw materials | FEA | Salter–Harris Type 4 fracture |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | Journal of the Brazilian Society of Mechanical Sciences and Engineering |
| Dergi ISSN | 1678-5878 |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q3 |
| Makale Dili | İngilizce |
| Basım Tarihi | 03-2019 |
| Cilt No | 41 |
| Sayı | 3 |
| Doi Numarası | 10.1007/s40430-019-1640-z |
| Makale Linki | http://link.springer.com/10.1007/s40430-019-1640-z |
